Sleep Mode; System Setup; Internet Setup; Factory Reset - Revo BLIK Bedienungsanleitung

BLIK RS Manual.qxd

Sleep Mode

Setting A Sleep Period
It is possible to programme BLIK
RadioStation to turn off after a pre-
defined period of time. To do so, select
the 'Sleep' option from the Main Menu.
Now, using the
select a sleep time period of 15, 30,
45, 60, 75 or 90 minutes.
BLIK will now automatically put itself into
standby mode after the time has
elapsed.

System Setup

Internet Setup

Advanced users can find and edit their
Wi-Fi settings in this section, these
include MAC address, DHCP status, PC
Settings, SSID, IP Settings etc.
Time Setup
The time can be set in one of two ways,
either manually via the System Setup
option on the Main Menu, or alternatively
simply press the MODE key until BLIK
RadioStation enters DAB Mode. In DAB
mode, BLIK will automatically set the
correct time and date from the DAB
transmitter. BLIK will remember its time
setting even when in standby mode, and
will only lose the time/date when power is
removed.
Under the 'Time Setup' menu, you can
also switch between 12 an 24 hour clock
formats.
Lastly, the 'Auto Update' option in the
'Time Setup' menu allows you to select
whether or not the time should be
synchronised with the DAB broadcaster
clock. If 'No Update' is selected, then the
clock remains as manually set.

Info

Software Version and Radio ID
You may be asked for one or both of
these pieces of information when dealing
with a technical support issue.
Both can be found under the 'Info'
heading, located in the 'Main Menu'.
4/1/08 19:38 Page 15
and keys, you can
S e t s l e e p t i m e
S l e e p t i m e o f f
S e t s l e e p t i m e
S l e e p t i m e o f f

Factory Reset

In the unlikely event that BLIK
RadioStation should 'crash', 'freeze' or
start behaving in a strange way, it is
possible to perform a full software reset.
This operation will completely reset BLIK's
memory, clearing all WEP/WPA codes
and user settings. This will effectively
return BLIK to its default factory settings.

Software Update

It is possible to remotely update BLIK
RadioStation's software via your Wi-Fi
internet connection, to ensure that you
have all the latest features, or to fix
known bugs in the software. To check
whether there are any updates available,
simply go to the 'System Setup' option on
the 'Main Menu' and select 'Software
Update'. BLIK will search to see if a
software update is necessary, then report
back. If an update is available and
necessary, BLIK will start the download
process and install its new software
automatically.
S W v e r si o n
i r . d a b p - mm i . r v o . v e
R a d i o I D
0 0 1 3 E O A1 1 D 2 5
English
15