Preset Memory - Seg CR 117 DABplus Benutzerhandbuch

FM OPERATION

Preset Memory

Ten preset stations can be stored in memory for
FM. To store a station follow the below steps.
1 Press and hold the INFO/MENU button until you
2 Use the T+ / T- buttons to cycle through the
menu options until you see " S TORE" when
displayed press the / SELECT button to activate
the preset store function.
3 P1" on the bottom right
hand side to indicate slot one of ten storage
locations. Select from 1-10 preset locations using
the T+ / T- buttons to cycle through 1-10.
4 Press the / SELECT button to store the current
station on the selected preset location.
13:44
FM
96.6
Recalling The Preset Memory
To recall a preset station follow the below steps.
1 Press and hold the INFO/MENU button until you
2 Use the T+ / T- buttons to cycle through the
menu options until you see " R ECALL" when
displayed press the / SELECT button to activate
the preset recall function.
3
locations. Select from 1-10 preset locations using
the T+ / T- buttons to cycle through 1-10.
NOTE: You can only recall stations from presets
that have been stored already.
4 Press the / SELECT button to recall the station
from the selected preset location.
P1
Display Modes
Press the INFO/MENU button, and the bottom
section of the display will show a sub text menu
P1" on the bottom right
with various information about the current station.
Every press of the INFO/MENU button changes
the information displayed.
This can be better explained in a diagram showing
the order of sequence. NOTE: once you reach the
last info setting the next press will return you to
Station Name/Frequency
DLS (scrolling text)
Programme Type
Date
Day
Signal Strength
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message
that the broadcaster may include with their
transmissions. This message usually includes
information, such as program detail etc.
6