To Set The Clock; To Set The Alarm - Gear4 AlarmDock Reveal Benutzerhandbuch

TO SAVE A PRESET FREQUENCY:
■ You can save up to 5 FM presets.
■ Adjust the radio to your desired frequency
then press and hold the
display flashes. Input the desired memory
position by pressing the
Press the button again to save.

To set the clock:

■ Move the Alarm switch to the OFF position.
■ Press and hold the SET button and press
/ to select either 24 hour or 12 hour.
Press the button to save.
■ The hour display will start flashing. Press
/ to adjust the hour. Press the
to save.
■ The minute display will start flashing. Press
/ to adjust the minutes. Press the
button to save.

To set the alarm:

■ Move the Alarm switch to the alarm number
you wish to set.
■ Press and hold the SET button.
■ The hour display will start flashing. Press
/ to adjust the hour. Press the
to save.
button until the
/ buttons.
button
button
■ The minute display will start flashing. Press
/ to adjust the minutes. Press the
button to save.
■ Press the /
modes – iPod, FM or buzzer. Press the
button to save.
■ Press the /
(between 0 and 32). Press the
to save.
Sleep / snooze functions:
■ Snooze: When the alarm sounds, press the
SNOOZE button once to set for 10 minutes.
■ Press the POWER button to stop the alarm
and reset it to go off the next day.
■ The alarm will ring for 1 hour if no buttons
are pressed.
■ Sleep: The sleep timer switches the unit off
automatically after preset intervals.
■ To activate the sleep timer, press the SLEEP
button and use the
the desired time (10 min, 20 min, 30 min, 40
min, 50 min, 60 min, OFF).
■ Leave the desired number on the screen to
set. After a few seconds it will disappear and
has now been saved. SLEEP will be
displayed on the screen.
User Manual | AlarmDock Reveal | GEAR4
button to scan through alarm
button to set the volume
button
and buttons to select
2