Support plus mp3 Handbuch Seite 14

GENERAL USE
USB port connection
● Ensure that your PC supports USB devices. (Refer to your PC manual for the
information about hardware).
● Connect your PC to the player using the USB cable.
● Press the PLAY key to turn ON the player. The LCD Screen will display a connecting
picture if connected properly.
● If you are using a PC that is running with Windows 98SE (or below) it is necessary
to install the software from the accompanying CD (provided). Simply insert the CD
and follow the on-screen instructions to install this software. This procedure is not
required when using Windows 2000, Windows ME, Windows XP or higher versions
thereof.
Sending and Deleting files between PC and Player
● Turn ON the player and connect it to your PC with the USB cable.
● It can be used like a Flash Disk to upload, download or delete file(s).
CAUTION
● Do not disconnect the player while a file is being downloaded. It could damage your
player.
● If the player does not work as expected, remove the battery and re-insert it into the
player after 3 seconds. Re-connect the player with the PC.
13