AEG MMS 4211 Bedienungsanleitung Seite 21

Games
There are 5 games integrated into this device. Select the
game you would like to play and then the „Start" line with the
I / I buttons (4/5). To start the game press the II
button (1).
To fi nish the game keep the MENU button (8) pressed down.
Use the I / I buttons (4/5) to select „Exit" and confi rm
with the II button (1).
NOTE:
If you do not wish to fi nish the game, select „Continue" and
press the II button (1).
Smart Tetris
In this game you have to form a continuous wall by rotating
bricks consisting of four parts. A complete row is then removed.
Once the bricks have reached the top edge of the screen the
game is over.
• The brick is rotated with the II button (1).
• Move the brick with the
• Press the VOL button (3) to accelerate the brick briefl y.
Hungry Snake
You have to collect food with the cursor to feed the snake. You
are not allowed to touch either the wall or the snake itself.
• With the MENU, VOL,
you can move the snake.
Box Move
In this game you have to move the frog to move the box over
the balls.
• With the MENU, VOL,
you can move the frog.
Tank
You have to defend yourself against the enemy tanks and
destroy them to reach the next level.
• With the MENU, VOL,
you can move the tank.
• Fire with the II button (1).
Gobang
The aim of the game is to obtain a continuous row of fi ve coun-
ters. This can be horizontal, vertical or diagonal.
• With the MENU, VOL,
you can move the cursor over the fi eld.
• Your counters are positioned with the II button (1).
Setup
In the „Setup" submenu you can select from the following menu
items: „USB Mode", „Power", „Language", „Display", „Record",
„Sys Tools".
05-MMS 4211 21
I / I buttons (4/5).
I and I buttons (8/3/4/5)
I and I buttons (8/3/4/5)
I and I buttons (8/3/4/5)
I and I buttons (8/3/4/5)
USB Mode
Here you can select between the MSC (standard) transmis-
sion mode and MTP (only compatible with Windows XP and
Windows Media Player 10).
Submenu „Power"
In the submenu „Power" the following settings can be selected:
„Auto off", „Always on".
Auto off
Setting for switching the device off automatically.
Here you can choose between the settings:
Close (Off), 15 Minutes, 30 Minutes, 60 Minutes, 90 Minutes
and 120 Minutes.
Always on
Here you can decide whether the device should remain on all
the time.
Language
For setting the language of the display.
Display
In the submenu „Display" the following settings can be selected:
„Brighness", „Backlight".
Brightness
Here you can set the brightness of the display.
Backlight (Illumination Time)
Here you can set how long the display should remain on until the
energy saving mode is activated:
15 Seconds, 30 Seconds, 1 Minute, Close (Always On).
Submenu „Record"
In the „Record" submenu you can select the following settings:
„Source", „Quality".
„Recording" Submenu
In the „Recording" submenu you can select from the following
settings: „Source", „Quality".
Quality
Here you can select the quality of the sound recording.
High Qualit.: High quality = high space requirement
Nor. Qualit.: Normal quality = normal space requirement
Long Time: Low quality = small space requirement
Submenu „Sys Tools"
In the „Sys Tools" submenu you can select from the following
settings: „Delete", „Format", „Reset", „Sys Info", „Delete Lic".
21
06.06.2007, 15:12:34 Uhr