AEG KH 4230 BT Bedienungsanleitung Seite 27

NOTE:
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If the Bluetooth connection is interrupted, the indicator
lights (1) and (2) flash rapidly.
Operation
The device is equipped with multi functional buttons. For
different functions press the respective button briefly or press
and hold.
On/Off
• Press and hold the button approx. 3 seconds to turn the
player on. A beep can be heard. After a short time, the
indicator lights (1) and (2) flash alternately.
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the de-
vices will be connected automatically. The prerequisite
for this is:
• The devices were already connected with each
other.
• Bluetooth is activated in your player.
• In order to switch the headphones off again, keep the
button pressed for approx. 3 seconds. A beep is heard
and the devices are separated. The indicator lights (1)
and (2) flash alternately. Press and hold the button again
approx. 3 seconds to turn the player off.
NOTE:
• Depending on the playback device used and its
operating system, the headphones switch off im-
mediately if necessary.
• Turn off the headphones when you are not using
them to conserve the battery.
• After approx. 12 minutes without a Bluetooth con-
nection, the headphones switch off automatically.
Replay/Pause
• Briefly press the button to pause playback.
• Press the button again to continue playback.
NOTE:
Depending on the device manufacturers, models, and
software versions you need to start the music playback in
your player.
Adjust Volume
Press the " " or " " button to adjust the volume.
WARNING:
Listening to music at high volume can damage your hear-
ing.
NOTE:
If the maximum or minimum volume is reached on the
headphones, a beep will sound.
Select Music
• Press the button in order to select the next track.
• If you press the button, the current track will be played
from the beginning. Press the
the previous track.
NOTE:
Your player must support this function.
Accept/terminate a conversation
• Push the button to accept an incoming call.
• To end the conversation, push the button one more time.
NOTE:
During an incoming telephone call, the music playback will
stop. After terminating the conversation, the music piece
will continue to be played back.
Ignore a call
To ignore an incoming call, keep the
for approx. 3 seconds.
NOTE:
Your mobile phone must support this function.
Change the ear pads
(Spare ear pads not included)
1. Pull the ear pad holder carefully
from the earpiece.
2. Remove the old ear pad.
3. Attach the new ear pad to the ear
pad holder.
4. Attach the ear pad holder onto the
earpiece so that the studs latch into
the round holders.
English
27
button twice to select
button pressed