Update
Software status and update
The Multiroom Receiver can, if required, be updated by your specialist retailer
through a software update.
Press the ROOM button.
Select Room. Confirm OK.
Select Receiver settings.
Confirm OK.
Select Software.
Confirm OK.
6RIWZDUH
8SGDWH
([LW
9HUVLRQ
'DWH
-XQ
5RRP
The version number and date of the current software version
are shown.
Select the option Exit.
Confirm OK.
9
Software update
Insert the USB stick with the update file "UPDATE.PAC" in
the root directory in the USB jack on the side ("Side view" on
page 26) of the Multiroom Receiver.
Press the ROOM button.
Select Room. Confirm OK.
Select Receiver settings.
Confirm OK.
Select Software.
Select the option Update.
Confirm OK.
6RIWZDUH
8SGDWH
:ULWLQJ UPZDUH
:KHQ UHFHLYHU /(' LV
*5((1 DJDLQ VZLWFK
0XOWLURRP 5HFHLYHU R
DQ RQ
5RRP
The software update starts. The red LED flashes.
The process can take up to 30 minutes.
As soon as the LED on the Multiroom Receiver is lit up
continuously in green (no red), switch it off with the mains
switch and then back on again.
➠
The unit must not be disconnected from the mains during the
update process.
41 -