Trouble Shooting - WFT Electra Pro 700 Super Comfort Speed Jig Handbuch

No display
1. Battery is connected incorrectly
2. Cable break
3. Insufficient battery voltage
Display shows incorrect data
The line data is not stored
or is incorrect.
Motor does not work
1. Battery is connected incorrectly
2. Cable break
3. Insufficient battery voltage
4. Cable terminals are corroded
5. Overload Protection is active

TROUBLE SHOOTING

Connect the cable according to this manual
Contact your WFT dealer
Replace or re-charge the battery
Rewind the line as described in this manual
in the section PREPARATIONS BEFORE USE
Connect the cable according to this manual
Contact your WFT dealer
Replace or re-charge the battery
Clean the battery terminals
Wind manually with the handle and wait until the
motor has cooled down
41