Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Connection; Protective Equipment; Startup; Unpacking - Beem Ecco De Luxe 4 in 1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Ecco De Luxe 4 in 1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
Ecco De Luxe 4 in 1

Electrical connection

For safe and trouble-free operation of the
appliance, the following instructions on the
electrical connection must be be observed:
Before connecting the appliance,
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. This
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
The mains socket must be protected
by at least a 16 A automatic circuit
breaker.
Ensure that the mains cable is undam-
aged and is not laid over hot surfaces
or sharp edges.
The connecting cable must not be
strained or bent.
Always unwind the mains cable com-
pletely before connecting the appliance
to the mains socket.
The electrical safety of the appliance
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
24

Protective equipment

The appliance is equipped with boil­dry
safety protection.
NOTE
If the kettle is filled with too little
water or switched on without any
water at all, heating is switched off
automatically by a safety switch.
See section Resetting the boil-dry
protection (page 28).

Startup

Unpacking

Remove the appliance, all accessory
parts and the user manual from the
box.
Remove all packaging materials and
protective foils from the product and
the accessories before using it for the
first time.
NOTE
Never remove the rating plate or any
warning signs on the appliance.
Keep the original packaging during
the warranty or guarantee period of
the appliance in order to return the
appliance in the packaging in the
event of a warranty or guarantee
claim. Transport damage will invali-
date the warranty or guarantee.

Checking the delivery contents

Check for visible signs of damage or miss-
ing items.
Report incomplete or damaged contents to
your supplier immediately.
BEEM - Elements of Lifestyle
EN

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis