Setting Up The Device; Modes Of The Device - Auriol IAN 94702 Bedienungsanleitung

Open the battery compartment cover by pushing it outwards
in the direction of the arrow. Remove the insulation strip.
Close the battery compartment cover again.
Your digital timer is now ready for operation.

Setting up the device

You can set up the device on horizontal, flat surfaces, by folding
the stand downwards (see Fig. B). Alternatively, you can use
11
the magnet
13
Operation
Q

Modes of the device

The digital time has two modes, which are displayed at the top of
the display
1
Press the CLOCK (TIMER) key
between the Clock and Timer modes.
to fasten the device to magnetic surfaces.
.
to switch back and forth
5
GB 11