Building In - Atag VD1674M Gebrauchsanweisung

INSTALLATION

Building in

EN 12
560-568
590
1. Put the plug of the device in a grounded wall socket.
Slide the appliance in the kitchen cupboard opening. Check
whether the casing fits correctly.
2. Screw the drawer securely to the cupboard at the left and right front
using the 4 screws supplied.
3. Slide the decorative strips over the draw profiles on the left and
right, starting from the top.
Note! When sliding out the drawer, it can tip forward if it is not
securely screwed to the kitchen cupboard.
min. 550
450
550
556
141
425
135
597