Cleaning And Care; Troubleshooting; Technical Data - percare 16611021 Bedienungsanleitung

NOTES:
•
The regular addition of commercial denture cleansers (tablets or powder) can inhibit bacte-
ria growth on the denture.
• Increasing the cleaning effect is also possible by simply adding commercial dishwashing
detergent. It solves those grease traces from the surface of the object to be cleaned that
cannot be removed by the ultrasonic impulses.
Ensure that the dishwashing detergent does not contain any lipid-replenishing substances.
• In order to remove dirt that was not eliminated during the first cleaning process, we recom-
mend repeating the cleaning process. Please allow the appliance to cool sufficiently before
you start a new cleaning process.
• After the cleaning process is finished, pull out the power plug from the grounded socket,
open the lid and remove the object from the appliance.
Empty the tank in order to prevent limestone. The water tank can be removed for emptying
and cleaning purposes (→ 06. Cleaning and Care).

06. Cleaning and Care

DANGER!
Before cleaning the appliance, pull out the power plug and allow the appliance to cool.
Never immerse the device, cable or power plug in water or another liquid for cleaning
and care purposes.
WARNING!
Do not clean the ultrasound cleaner with aggressive cleaners or pointed objects.
• The water tank can be removed for easy emptying/filling and for cleaning.
• Use a cloth to clean and dry the tank.
• Ensure that there is no residual water left in the container in order to prevent limescale.
• Store the appliance in a cool and dry place.
• Keep the ultrasound cleaner out of children's reach.

20

07. Troubleshooting

DANGER! Never attempt to repair the appliance yourself. Always remove the power
plug from the socket whenever a fault occurs.
Problem Possible cause
The appliance is • The water tank has not been
connected, but attached properly to the base.
does not show
• No power supply.
any function.
• The cable is defective.
The object to be • Appliance is not switched on.
cleaned does
• There is no water or too little
not get clean.
water in the tank.
• No cleaning detergent added.

08. Technical Data

Article no.
Mains voltage
Class of protection
Max. filling capacity
Tank capacity
Ultrasonic output
Ultrasonic frequency
In the course of product improvements we reserve the right to make technical and visual
changes on the appliance or to its accessories.
Remedy
• Place the water tank properly on
the base.
• If necessary, have the grounded
socket the appliance is connected
to and/or the installation checked
by a qualified electrician.
• Consult a qualified electrician.
• Switch the appliance on.
• Fill water in until the „MAX"
marking is reached.
• Add cleaning detergent depending
on the type of soiling.
16611021
220–240 V ~ 50 Hz
∏ II
350 ml
450 ml
35 W
42 kHz

21