Herunterladen Inhalt Inhalt Diese Seite drucken

General Information; Operation And Controls; Before Using For The First Time - Nova Cyclone Cleaner 2000 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

General information

This powerful, compact vacuum cleaner is
equipped with a complete range of useful
accessories, so that you can thoroughly
clean your house. This vacuum cleaner
has a removable, easy-to-empty dust
collector, so you no longer need to use a
dust bag!
Operation and
controls
See figures 1, 2, 8, 9 and 10.
The appliance includes the following
components:
1 Vacuum cleaner hose handle locking
button
2 Vacuum cleaner hose handle
3 Air supply control slide
4 Vacuum cleaner hose
5 Front castor
6 Slot for the telescopic tube
7 Crevice tool
8 Small nozzle
9 Power cord with plug
10 Combi nozzle
11 Switch for the combi nozzle with a
brush
12 Switch for the combi nozzle without a
brush
13 Rear castor
14 Vacuum cleaner handle
15 Cord rewind button
16 On/Off switch
17 Button for adjusting the suction force
18 Telescopic tube holder
19 Telescopic tube locking button
20 Telescopic tube
21 Vacuum cleaner hose attachment piece
22 Vacuum cleaner hose connection
23 "Dust collector full" indicator
24 Dust collector
25 Dust collector base
26 Dust collector base unlocking button
27 Dust collector cover
28 Dust collector handle/unlocking device
29 Filter housing
30 HEPA filter
31 Outlet filter grille
32 Outlet filter holder
33 Outlet filter

Before using for the first time

• Read and follow these instructions.
Keep this instruction manual in a safe
place.
• Make sure the mains voltage is the
same as the voltage on the
appliance's type plate.
1 Remove all the packaging materials
and stickers from the appliance.
2 Attach the vacuum cleaner hose to the
appliance as follows (see figure 2).
Slide the hose attachment piece into
the connection on the appliance. The
lips on the attachment piece must fit
into the grooves in the connection.
Secure the attachment piece by rotating
it clockwise.
3 Attach the vacuum cleaner hose handle
to the telescopic tube as follows (see
figure 3). Press the locking button on
the handle and slide the end of the
handle into the end of the telescopic
tube. Make sure the locking button
clicks into the opening in the tube. You
can remove the tube from the handle by
pressing the locking button and pulling
the handle out of the tube.
Use
Always make sure all the filters and the
dust collector are correctly fitted before
using the appliance. Damaged or
incorrectly fitted filters may cause damage
to the appliance.
Preparations
Cyclone Cleaner 2000 Article 330300
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis