Declaration Of Conformity; European Union - Sun Microsystems XVR-100 Installationshandbuch

Compliance Model Number:
Product Family Name:
EMC
USA—FCC Class B
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference that may cause undesired operation.

European Union

This equipment complies with the following requirements of the EMC Directive 89/336/EEC:
As Telecommunication Network Equipment (TNE) in both Telecom Centers and Other Than Telecom Centers per
(as applicable): EN300-386 V.1.3.1 (09-2001) Required Limits:
EN55022/CISPR22 Class B
EN61000-3-2
EN61000-3-3
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
As information Technology Equipment (ITE) Class B per (as applicable):
EN55022:1998/CISPR22:1997
EN55024:1998 Required Limits:
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
EN61000-3-2:1995 + A1, A2, A14
EN61000-3-3:1995
Safety
This equipment complies with the following requirements of the Low Voltage Directive 73/23/EEC:
EC Type Examination Certificates:
EN60950:2000, 3rd Edition
IEC 60950:1999, 3rd Edition
Evaluated to all CB Countries
UL 60950, 3rd Edition, CSA C22.2 No. 60950*

Declaration of Conformity

855 (aka XVR-100)
XVR-100 Graphics Accelerator (X3769A, X3770A)
Pass
Pass
6 kV (Direct), 8 kV (Air)
3 V/m 80-1000MHz, 10 V/m 800-960 MHz and 1400-2000 MHz
1 kV AC and DC Power Lines, 0.5 kV Signal Lines
2 kV AC Line-Gnd, 1 kV AC Line-Line and Outdoor Signal Lines, 0.5 kV Indoor Signal Lines > 10m
3 V
Pass
Class B
4 kV (Direct), 8kV (Air)
3 V/m
1 kV AC Power Lines, 0.5 kV Signal and DC Power Lines
1 kV AC Line-Line and Outdoor Signal Lines, 2 kV AC Line-Gnd, 0.5 kV DC Power Lines
3 V
1 A/m
Pass
Pass
Pass
TÜV Rheinland Certificate No.
CB Scheme Certificate No. US/6923/UL
File: E15487-A1-UL-1
Declaration of Conformity vii