Heating Of The Sauna - SAWO DRAGONFIRE HEATER KING Bedienungsanleitung

Heating of the Sauna

CAUTION!
Smoke and odor formation when heating up for the first timeWork materials
from the manufacturing process will be present on the new heating elements.
These evaporate when the sauna heater is heated up for the first time. This
produces smoke and an unpleasant odor. Breathing in the fumes or smoke can
be harmful to your health.
Perform the following steps when operating the sauna heater for the first time
and if the heating elements for the sauna heater have been changed. In this
way you will prevent damage to health due to the fumes and smoke produced
when heating up for the first time.
1. Select the highest possible temperature in the sauna control.
2. Heat up the sauna heater for half an hour. Do NOT stay in the sauna cabin
during this period.
3. Allow the sauna cabin to ventilate thoroughly after heating up for the first
time.
4. If no smoke or odor is produced the next time the sauna heater is heated
up, you can start to use the sauna. If smoke or odor is produced again,
leave the sauna cabin immediately and repeat the initial heating up process
followed by ventilation.
Always check the sauna room before switching sauna heater on (to be sure that
there is no combustible things within the safety distances of the heater or on the
heater). Make sure that sauna room has been efficiently ventilated. If the output
of the heater is proper it will take about an hour to reach suitable temperature
(Fig. 5). The temperature in sauna room should be between +60 - + 90 °C,
according to the preference of user. Too powerful heater will heat sauna room
too quickly and the stones won't have enough time to warm. The water poured
on the stones will not evaporate, but flow into the stone holder. An
underpowered heater, on the other hand, would lead to an undesirably long
heating period.
21
ENGLISH