Switching on / off
The system is switched on and off together with the ignition.
–
The display first shows a safety notification for usage of the system.
Confirm this notification by pressing the ENTER/O.K. key.
–
The Main Menu appears.
•
After some seconds the system is initialised and you can select the
navigation functions (options in highlighted letters).
Stand-by mode
If you are disturbed by the brightness of the display screen (for example by night
or in tunnels) you can switch off the display.
Select "Stand-by" in the main menu.
–
The display is switched off.
•
If an external loudspeaker is connected to your system (optional), you will
still hear the guidance advice.
Press one of the cursor keys 4, 6, 8, 2, the ENTER/O.K. key or the MENU
key on the remote control to switch on the display again.
•
If the navigation system was switched off in stand-by mode it restarts in
stand-by mode when switching the ignition on again.
Volume adjustment
Press + or - key on the remote control to adjust the voice volume of the
guidance advice.
–
You hear "Louder" or "Softer" with the current volume setting.
•
This volume adjustment influences both the volume level of an external
speaker (if installed) and the volume level of the built-in speaker (in the
display unit).
12