Battery Charging - PENTAGRAM Quadra Mini Pro IPS Kurzanleitung

1. Volume Control - to increase / decrease the volume.
2. MicroUSB socket:
- allows to charge device
- MicroUSB socket USB On-The-Go - allows to connect an external drive keyboard and even a computer
mouse.
3. HDMI - to connect the optional HDMI cable in order to use HD TV as a monitor of the tablet. HDMI cable is
not included.
4. Microphone.
5. Headphones socket – when connected, the headphones are used instead of the built-in speaker.
6. Card slot microSD / microSDHC.
7. Power button - to turn on or off the device, press and hold this button for approx. 4 seconds.
- Press the button to enter the device in sleep mode and lock the screen. In this mode, the machine is still
working only screen of the device is turned off.
- Press the button and drag the "padlock" on the left to unlock the screen.
8. Camera front 0.3 Mpix.
9 Camera rear 2.0 Mpix.
10. RESET button - use this for emergency restart.
11. Speaker – if no headphones are connected to the device, all the sounds will be played through the built-in
speaker.

Battery charging

Before you start to operate the device, it is recommended to charge and discharge the battery several times so
that it reaches its full performance and service life.
In the top right corner of the main menu there is an icon representing the battery charge. When the icon is filled
with bars, it means the battery is fully charged. If the icon is empty, the battery is very low and you have to
charge it as quickly as possible. During charging, you can operate the device as normal.
To charge the battery, either:
• connect the device to a computer using the USB cable, or
• connect the device to the AC charger.
PENTAGRAM Quadra Mini Pro IPS [P 5353]
EN
7