Firmware-Upgrade - PENTAGRAM Quadra Mini Pro IPS Kurzanleitung

PENTAGRAM Quadra Mini Pro IPS [P 5353]
Connecting to the computer
NOTES:
•
To install applications and store your own files you can use either a memory card and flash memory.
•
When the data are being transferred, do not disconnect the device from the computer to prevent the
possible damage or loss of data.
The device works with the following operating systems: Windows Me / 2000 / XP / Vista / 7 / 8.
After connecting the operating device to the computer via a USB cable to the device, select USB Connection and
Enable USB stick. The device will be detected by the computer as a portable hard disk and will be visible in
Windows Explorer.
Firmware upgrade
EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN
If necessary, you can upgrade the device firmware to a newer version. The latest firmware is available for
download at www.pentagram.eu
preparing and performing the upgrade.
Unlocking and locking the screen
To unlock the screen, press the power button on the device, then touch and drag the lock icon on the open
padlock icon.
To lock the device, press the power button on the device. The unit will go into sleep mode if not used for a long
time (Settings-> Display-> Sleep).
Connection to wireless network
Press the icon
side wireless network that you can connect to. Tap on the chosen network and enter the password if the network
is secured.
Please note: It is strongly recommended to turn the WiFi off if you are not using the network. This will prolong
the battery working time.
8
. The downloaded new firmware archive contains detailed information on
and then go to Settings. In the menu on the left (first) turn on Wifi, and find on the right