Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Manual for World Timer Chronograph, Solar, radio controlled W342
-
Solar-RC movement with rechargeable cell.
-
Radio controlled clock change for summer- and wintertime
-
Perpetual calendar
-
Worldwide manual clock change
-
Indication down right LCD: Day, Date, Month, Year, Time of foreign Time zone, Stopwatch
-
Indication down left LCD: Battery level (Power Reserve)
-
Indication top left LCD: Time zone
-
Indication top right LCD: Foreign time zone, menu ("STW": stopwatch)
-
Stopwatch 1/100 seconds
-
Power reserve 1-8 Months. Depends on power level.
-
Sleep Function, for energy saving. Activation after 3 days in darkness. Hands will stop at 12:00. Back in light, hands will rotate to actual time.
After longer time in darkness, hands will rotate after pressing any button.
Important, commissioning of watch!
Due to heavy shocks or magnetic fields the hand position may differ from the internally saved radio time. The initial setup serves to resynchronise the hands with
the internally saved radio time.
1. Charging cell
Please be shure of enough charging the cell. For more information, please take a look at „Power reserve"
For storage of the watch, we will suggest a light place.
For a clear function, Power Reserve should not be under orange scale.
Attention! If the cell should be completely discharged for a longer time, new charging could damage the movement.
Please let change the cell from a professional.
2. Function of MODE:
If pressing MODE, you can dial following mode:
Mode 1
Analog time and analog date
3. Radio reception
If Mode 1 or Mode 2 shown, press for radio reception
the Start/Stop-button for ca. 3 Seconds. The Second hand Stopps, the radio reception
beginns. This will take 3 to 8 Minutes. When radio reception was successful, in top right
LCD will light antenna-symbol.
4. Manual programming of analog time and date.
When mode 1 is shown, press SET for about 3 seconds. Now it will change to programm mode.
The analog timezone flashes, for changing timezone press Start/Stop-button. Press MODE for confirm and to step to DST (Daylight Saving Time / summertine)
of analog time. Press Start/Stop to activate/deactivate DST. If DST is activated, in top left LCD will appear DST. Now press for about 3 seconds SET for
program Minute, Hour, Year and Month. For changing, press Start/Stop, for step to next press MODE. For finishing programming press SET. Now the hands
and LCD will calibrate.
5. Programming of world time zone with DST
When mode 2 is shown, (or top right LCD shows any world time zone), press SET for about 3 seconds. The world time zone flashes.
Press Start/Stop for changing. Now press MODE for next step -> (DST / summertime). For changing press Start/Stop. Finishing with SET.
6. Stop watch
Press MODE to go to stop watch (Display shows STW). Press Start/Stop to start and to stop the Stop watch. Press SET for zero.
Mode 2
Analog time zone, digital time zone und
digital time (hour, minute und Second)
9
.
Mode 3
Analog time zone and Stop watch
1/2
Werbung
