Package Contents - Lindy 38175 Benutzerhandbuch

User Manual
Introduction
Thank you for purchasing the LINDY Fibre Optic HDMI Hybrid Cable! This Cable allows you to transmit
HDMI signals up to a distance of 50m. This cable is a hybrid cable containing both fibre optic and copper
cores.
To extend signals over 50m we provide multiple solutions both with and without IR support and up to
3000m. Please go to www.lindy.com to view our extensive range.
Features
•
Suitable for use with computers, home theatre's, video walls and professional equipment
•
Supports HDMI resolutions up to Ultra HD 4K (3840x2160) 60Hz, including 1080p 3D
•
Supports colour depth up to 48 bit (16 bit per channel)
•
Supports lossless HDMI audio formats like Dolby True HD and DTS-HD, etc.
•
Supports HDMI 1.4b/2.0, HDCP 1.4/2.2 pass through, Audio, CEC, but no HEC and no ARC
•
Available in lengths from 20m to 50m
•
Supported bandwidth: up to 12Gbps

Package Contents

LINDY HDMI Hybrid cable
This User Manual
Installation and Operation
The minimum bending radius of the hybrid cable is approximately 4cm / 1.5 inch, never bend the
cable to a smaller radius because this would irreversibly destroy the cable.
Never step on the cable or put any heavy pressure on to the cable
The maximum tensile load to the cable is 50N (5kg). Never pull the cable with higher load.
This cable can be used in only one direction. The connectors are labelled "SOURCE" and
"DISPLAY". Each connector must be plugged in to the correct port to avoid display issues.
The connectors include electronic chipsets that require ~250mA of power. Your HDMI device
should be able to provide enough power but when additional power is required you may need
to use a HDMI power injector cable. Please see the LINDY website for more details on this.
Connect the cable to your devices first before powering on your display and source to
complete the installation.
English