ZENEC ZE-60MP3 Bedienungsanleitung Seite 42

10.9 Illumination Color (COLOR)
This option allows selection between two colors for the backlight illumination of the unit.
"COLOR 1" is the default color and will illuminate the unit with blue backlight. Use volume
up/down button to select "COLOR 2", which will illuminate the unit with red backlight.
10.10 Selectable Clock Display (CLK ON LCD)
When the selectable clock display feature is activated, the clock and default greeting note
will appear on the display when the radio is turned off but the ignition switch is still on.
"CLK ON LCD On" is the default setting for this option. To select the clock and greeting note
to be displayed when the unit is powered off, use volume up/down button to select „CLK
ON LCD Off".
10.11 Key Illumination On/Off (KEY LIGHT)
The Key Light on/off feature controls how the front panel buttons illuminate when the unit is
turned off, but the ignition switch is still on. When the Key Light feature is activated with the
unit turned off and the ignition turned on, the front panel buttons will illuminate. When the
Key Light feature is deactivated with the unit turned off and the ignition switch turned on,
the front panel buttons will not illuminate.
10.12 Personal Text Message
Press the MENU button repeatedly until see the "PTM" on the display, this will allow the user
to input his favour greeting note on the display. The "INPUT MESSAGE" will be displayed
by default. User is allowed to input max. 20 letters or symbols for the "PTM" to be displayed
on the LCD.
When "PTM" is displayed on the display, press "ENTER" button to start up the "PTM" enter
process. Use the volume up/down button to input A & Z 0-9. +/- ! etc. Press "ENTER"
button to confirm the first letter input. Repeat the procedure and enter the rest of the others
letters. If you want to change the inputted letters you can press Tuning up/down button to
move the cursor backwards to change the inputted letters. If no more button pressing after
7 seconds, the inputted letters will be automatically set as PTM. The previous PTM will be
erased automatically once a new PTM is inputted.
Press "DISPLAY" button sequentially (Frequency ➝ Spectrum ➝ Animation 1 ➝ Animation
2 ➝ PTM). The inputted message will be scrolling through the LCD continuously until a new
operation of the unit has been inputted.
E - 14