Herunterladen Diese Seite drucken

Grundig TVR 3705 Handbuch Seite 4

Vorschau ausblenden Andere Handbücher für TVR 3705:

Werbung

Allgemeiner Teil / General Section
Entwicklungscode / Produktionscode
Technische Weiterentwicklungen oder Änderungen sind wie folgt auf
dem Typenschild ersichtlich:
• Produktionscode – geringfügige Änderungen
• Entwicklungscode – gravierende Änderungen
Bestellnummer / Order number
Produktionsdatum / Production date
Produktionscode / Production code
Entwicklungscode / Evolution code
Änderungen Abgleich
zu Punkt 1. Leistungs-Chassis (GSPD)
Abgleichvorgang
Spannung mit R3358
entsprechend dem Gerät ein-
(Ubat)
stellen.
TVR37... 101,5V
TVR51... 120,3V
TVR55...
84,0V
zu Punkt 2. Bildrohrplatte
Vorbereitung
Folgende Einstellungen im betriebswarmen Gerätezustand
(ca. 15 Minuten nach dem Einschalten) durchführen:
– Kontrast "84% = OSD-Skala-Maximum minus 4 Teilstriche"
– Helligkeit "50%"
– Schirmgitterregler (SCREEN) "Linksanschlag"
– R3919 und R3921 "Mittelstellung"
– Schwarztestbild an der AV-Buchse einspeisen
– Entsprechend dem Gerät jeweils folgende Werte mit den
Cutoff-Reglern R3920, R3918 und R3917 an den R-, G-
und B-Eingängen der Bildröhre einstellen:
TVR 37...:
TVR 51... / TVR 55...:
1 - 4
115V
140V
Evolution Code / Production Code
Technical advance developments or changes are to be seen from the
type plate as follows:
• Production code – minor changes
• Evolution code – important changes
Alteration Adjustment Procedures
to point 1. Power Chassis (GSPD)
Alignment Procedure
With R3358
set the following voltage according to the
(Ubat)
different models.
TVR37... 101,5V
TVR51... 120,3V
TVR55...
to point 2. Tube PCB
Preparation
Allow the set to warm up (for approx. 15 minutes after
switching on) and carry out the following adjustments:
– Contrast "84% = maximum minus 4 divisions on OSD scale"
– Brightness "50%"
– Screen grid adjustment control (SCREEN) "left stop"
– R3919, R3921 "center position"
– Feed a black test pattern into the AV socket
– With the cutoff controls R3920, R3918 and R3917, set the
following levels at the R, G, and B inputs of the picture
tube dependent on the TVR model:
TVR 37...:
TVR 51... / TVR 55...:
TVR 37..., TVR 51..., TVR 55...
Gerätetyp / Type of product
Fernbedienung / Remote Control
Seriennummer / Serial number
Geräte-Optionscode / Option Code
84,0V
115V
140V
GRUNDIG Service

Werbung

loading