Sealing Envelopes - FP FPi 2300 Betriebsanleitung

4. When the resistance is too high, turn knob A counter-clockwise, until only a slight
resistance is felt.
5. Place the bottom envelope between the rollers (flap down and trailing - bottom side
of the envelope pointing to the machine).
2
6. Loosen the stack of envelopes, and place the stack on top of the bottom envelope.
7. Shift envelope support B in or out, so that the flap side of the envelope is lifted
approximately 20 mm (0.8").
8. Turn envelope support B so the weight of the envelopes is evenly distributed on both
sides.

Sealing Envelopes

Switch the envelope sealing on or off:
1. Lift the handgrip to open the top cover.
16