Herunterladen Diese Seite drucken

Gastros InductWarm 100 Built-in GN 1/2 Montageanleitung

Werbung

InductWarm
®
Montageanleitung InductWarm
-Einbaulösung 100 GN 1/2
a s t ro s
®
Assembly instruction InductWarm
Built-in solution 100 GN 1/2
®
S W I T Z E R L A N D
Version 2014-1.10 - de/eng

Werbung

loading

Inhaltszusammenfassung für Gastros InductWarm 100 Built-in GN 1/2

  • Seite 1 InductWarm ® Montageanleitung InductWarm -Einbaulösung 100 GN 1/2 a s t ro s ® Assembly instruction InductWarm Built-in solution 100 GN 1/2 ® S W I T Z E R L A N D Version 2014-1.10 - de/eng...
  • Seite 2 Allgemeine Hinweise und Lieferumfang / General instructions and delivery contents Bewahren Sie diese Anleitung bitte für weitere Verwendung auf. Please keep this instruction for further use. Beachten Sie bitte die Sicherheitshinweise der beiligenden Bedienungsanleitung. Please pay attention to the safety notes within the enclosed InductWarm system manual.
  • Seite 3: Sicherheits- Und Montagehinweise

    Sicherheits- und Montagehinweise / Assembly and safety instructions • Der Monteur muss sicherstellen, dass die Einabaulö- sung nach der Montage noch von unten zugängig ist, sollten Wartungsarbeiten notwendig werden. • Unter den Induktionsfeldern dürfen keine nach oben offenen Schubladen montiert sein. • Die maximale Ansaugluft darf direkt vor den Lüftern die Temperatur von 40°C nicht überschreiten.
  • Seite 4 Übersichtszeichnung Belüftung...
  • Seite 5 Arbeitsschritte 1. Die Aussparung anzeichnen: Hierzu den Einbaurah- aufgescheuert und auf Zug belastet wird. Schubladen men auf dem Kopf flach auf die Arbeitsplatte legen und dürfen sich nicht unter dem Einbaugerät befinden, aus- den Umriss mit einem spitzen Bleistift anzeichnen. Da- ser es befindet sich eine stabile Abtrennwand über die- bei die Masse 392 mm x 276 mm der nebenstehenden ser.
  • Seite 6: Overview Drawing

    Overview drawing Air supply...
  • Seite 7 Working steps 1. Marking the recess: to do this, lay the mounting frame 8. Laying glass plate: place the glass plate centred and upside down, flat on the worktop and mark the outline horizontal onto the mounting frame. The printed glass with a sharp pencil.
  • Seite 8 Farbe und Form von Abbildungen, Irrtümer und Druckfehler, sowie excepted. Subject to change without prior notice. InductWarm and the Änderungen bleiben vorbehalten. InductWarm und das InductWarm- InductWarm logo are registered trademarks of Gastros Switzerland AG. Logo sind geschützte Marken der Gastros Switzerland AG. Gastros Switzerland AG...