ONE URC-7950 Bedienungsanleitung Seite 178

Shifted Learning
You can also learn a function on a key of the ONE FOR ALL without
sacrificing the original ONE FOR ALL function. A Shifted Learning function
can also be put on any key EXCEPT for the following: Device keys, MAGIC
key, Number keys. To install a Shifted Learning function, simply follow steps
1-8 on the previous page. During step 5, press M (MAGIC) once before you
press the key where you are placing the learned function.
To access the shifted function, press M (MAGIC) and then the key you have
learned on.
To delete a learned function:
1 Press and hold down the M (MAGIC) key until the red LED
underneath the POWER key blinks twice (the red LED will blink once
then twice).
2 Press 9 7 6 (the red LED underneath the POWER key will blink twice).
3 Press the device key in which the function will be deleted.
4 Press twice on the learned key which will be deleted (the red LED
underneath the POWER key will blink twice).*
5 If there is another key which you wish to delete, repeat steps 1-4.
6 The original functions of the ONE FOR ALL 5 will now be present.
* To delete a Shifted Learned feature, press M (MAGIC) before you press
"the learned key to be deleted" (during step 4).
To delete all learned functions within
a specific mode:
1 Press and hold down the M (MAGIC) key until the red LED underne-
ath the POWER key blinks twice (the red LED will blink once then
twice).
2 Press 9 7 6 (the red LED will blink twice).
3 Press the appropriate device (mode).
The Operational Reset will erase all learned functions across all modes and
some other programmed functions like Key Magic and Macros.
1 Press and hold down the M (MAGIC) key until the red LED
underneath the POWER key blinks twice (the red LED will blink once
then twice).
2 Press 9 8 0 (the red LED will blink four times).
WWW.ONEFORALL.COM
Operational Reset
9