Santec HEL-62D Bedienungsanleitung Seite 19

Bedienungsanleitung / User manual
HEL-62D
3. Put the video cable and the power cable through the hole of the lower housing part
(fig. 6) and connect them to the connection board (fig. 7).
Mount the wall bracket tot he lower housing part using the 4 silver screws.
Do not forget to insert the gasket (fig. 8).
4. Having installed the camera, please adjust it as needed. Set the camera lens as
needed (fig. 9 and 10). Then tighten all screws (fig 11).
The camera is not included in the delivery.
Also see page 20: „Notes on camera adjustment"
_________________________________________________________________________________
- 19 -