Herunterladen Inhalt Inhalt Diese Seite drucken

ZENEC ZE-DAB60 Bedienungsanleitung Seite 8

Dab+ tuner
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

PLACING AND CONNECTING ANTENNA
Identify an suitable place for installation.
Ideal place (on the front glass) for film antenna installation is the one that
meets the following conditions:
- Vertical: the antenna top should be at least 5 cm away from the car roof for
optimum reception performance.
- Horizontal: the antenna should be aligned with the car frame (A pillar).
Do not install at the following locations:
- Where it may block driver's view.
- Where it may obstruct operation of safety devices such as airbags.
- On movable glass surface.
Installation: Step 1 to 9
Clean the area
• With wipe cleaner provided,
clean the surface where
antenna film, amplifier unit
and earth sheet is to be
placed.
• Ensure that the glass
surface is completely dry
before mounting.
• Warm the front windscreen-
glass if necessary to ensure
good adhesion.
Remove the protection slip
• Gently remove the protec-
tion slip horizontally.
• Do not touch the sticky
surface (adhesive side) of
the antenna film.
8
Paste the antenna
• Gently paste the antenna
along with A pillar at the
pre-set area.
• Take care not to touch the
contact port.

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis