Technische Daten / Specifications - UNIelectronic UMA 5460M Bedienungsanleitung

3. Switches & Controls
3.1 Inputs
The UMA 5460M has 6 inputs with identical options for the configuration.
Controls
The input gain can be controlled with the control (1.4)
The Bass (1.1) & Treble (1.5) controls allow a tone adjustment
Muting
The Input signal can be muted by pressing the MUTE button (1.8)
Zone Routing
Pushing the buttons ZONE 1 – Zone 4 (1.2, 1.3, 1.6, 1.7) routes the input signal into
the selected zones.
3.2 Front AUX Input
This 3,5mm phones input (2.1) allows feeding a line signal into all zones.
The gain can be adjusted with control (2.2). The input sensitivity is -18dB.
3.3 Zone Outputs
The LED bar (4.1) shows you the signal strength of the output signal
of the particular zone.
The control (4.2) allows adjustment of the volume of the particular zone.
Pushing the MONITOR button (4.3) routes the zone signal to the monitor outputs.
3.4 Monitor Out
At this output the monitor signal is available.
The control (3.2) allows volume control of the monitor signal.
The 6,3mm phones connector (3.3) allows for the connection of a head phone.
This signal is also available at the rear of the amplifier (see also chapter 2.2).
Technische Daten /
Specifications
Ausgangsleistung:
Eingangsempfindlichkeit:
Frequenzgang:
Rauschabstand :
Klirrfaktor:
Stromaufname:
Betriebsspannung:
Abmessungen:
Gewicht:
Rated output power:
Input sensitivity:
Frequency response:
S/N ratio:
THD:
Power consumption:
Operating voltage:
Dimensions:
Weight:
4x 60W / 100V / 4Ω / 8Ω / 25V / 50V / 70V / 100V
MIC: -50dB, LINE: -17dB, AUX: -18dB, PAGE: -30dB
50Hz~18KHz (+/-3dB)
MIC: ≧ 65dB, AUX ≧ 75dB
≦ 0.5% at 1KHz
360W
190V / 240V 50Hz
420x342x133mm
7,5 kg