Water Level Control - Sentlotec Ck 31 Gebrauchsanweisung

Instructions for use for the user
● Using the UP/DOWN buttons
value is entered, (min. 10 °C - max. 80 °C) e.g. [50%]:
In the display
● Press the PROG/OK
In the display
e.g. [15 H]: 15 H
The new set value for the relative humidity has been set.
Note - beep
If a signal tone sounds after the temperature is entered and the indica-
tor light TEMP
temperature
another. To comply with safety regulations, the device issues a signal
tone and automatically selects the maximum possible value of the inter-
dependent functions.

8.10. Water level control

1. The control unit has the option of automatic water level monitoring for clima
mode. If there is too little water in the evaporator (approx. 1 L), a warning
tone is emitted repeated and the text FILL appears in display
same time, the evaporator automatically switches off.
► Add water.
► The FILL message disappears after a short period.
Note
A requirement, however, is that the evaporator has the necessary signal
output for this function. Operation without this function is also possible.
WORLD OF WELLNESS
8
flashes: 50 H
6
button:
9
the characteristic relative humidity in the cabin appears,
6
goes on, please note the following: The functions
d
and the relative humidity
d
, the desired
b
p. 36/44
depend directly on one
. At the
6