Installation Instructions - Küppersbusch EGS3710 Gebrauchsanleitung

GB

1 / INSTALLATION INSTRUCTIONS

 This grill uses 2.500 watts at its maximum position. Therefore,
before connection, make sure that your electric wiring system is
at least fitted with a 16-ampere fuse.
 The grill must be compulsorily connected to an earth.
 The plug must be accessible after installation.
 If the supply lead is damaged, it must be replaced by an
equivalent lead (H07RNF 3x1,5 mm²) available from the after-
sales department.
 It is also necessary to provide a bipolar cut-off device in your
power supply circuit, where the opening of the contacts is more
than 3 mm.
Cooking with the grill necessarily involves the emission of

fumes. Sometimes, when cooking too fatty meat, small
flames similar to those of a barbecue will appear. This factor
will have to be taken into account when choosing the place
where your grill is to be fitted.
IT IS ABSOLUTELY IMPERATIVE TO LEAVE A SPACE OF AT
LEAST 5 CM BETWEEN THE BOTTOM OF THE GRILL AND THE
FIRST SHELF OF THE KITCHEN UNIT.
THE DISTANCE BETWEEN THE WALL AND THE REAR OF THE
APPARATUS SHOULD BE 5,5 CM.
14