Problems - SUN DASH 342 Radius Gebrauchsanweisung

Please read and observe ...

Problems

Faults Cause/Action
One or more of the UV The UV lamp is loose or it is defec-
lamps are not lighting tive.
up.
– Insert the UV lamp correctly or
replace it.
The starter is defective.
– Replace starter.
Tanning system is too Insufficient cooling.
hot.
– Clean air grill on the fan.
– Check to see if the tanning sys-
tem fan is working.
– Improve ventilation in the cabin.
The display does not No voltage.
illuminate.
– Check to see if the tanning sys-
tem has been connected to the
power supply and if the fuse and
FI circuit breaker are switched
on.
Fuse on board is defective.
– Call customer service.
36
Page Faults
The display illuminates
and text is also
displayed but the lamps
63, 66
do not work.
The display illuminates
but no text is displayed.
63, 66
61 All of the lamps in a seg-
ment do not work.
The lamps start but the
tanning system fan does
not work.
Call our customer service department if other problems occur –
–
see Page 2.
2
Cause/Action
A board or an internal fuse is defec-
tive.
– Call customer service.
Control unit circuit board is defec-
tive.
– Call customer service.
A board or an internal fuse is defec-
tive.
– Call customer service.
A board or an internal fuse is defec-
tive.
– Call customer service.
Page
2
2
2
2