Prepare To Cook; Before First Use; Clock Setup - EUROCOM LOEWE PowerCook Bedienungsanleitung

ENGLISH

PREPARE TO COOK

BEFORE FIRST USE

Read all the instructions and important safeguards.
Remove all packaging materials; make sure items are received in
good condition.
Place multi-cooker on a flat, heat-resistant and non-flammable
surface.
Remove any stickers from the surface of the cooker and wipe the
surface clean with a damp dishcloth.
Wash all the accessories with warm soapy water using a sponge or
dishcloth.
Rinse well to remove soapy residue, then dry thoroughly.
Do not use abrasive cleaners or scouring pads.
Do not immerse the appliance, cord and plug in water at any
time.
POWER UP
Always check to see if the electric cord or plug is damaged before
use.
Attach plug to appliance first, then plug cord into the wall outlet.
You will hear a beep and the cooker will enter into the standby mode.
The LCD display will show the current time and other initial setting.
The cooker is now ready for cooking.

CLOCK SETUP

While in the standby mode, press 'STD/MIN' button until the time displayed
is blinking
Then press STD or MIN button respectively to adjust to the current time.
Press+ and – button to adjust the time
Press "START" button to confirm the setting.
Note: This unit is set in 24 hours time, for example 17:00 equals 5:00 PM