5
Configuration
5.1
Defining the function of the serial interface
In order to operate the keyboard, the relevant function must be
defined on the serial interface.
To access Serial Interfaces click
A
B
Settings:
Interface: Com port to which the keyboard is connected.
Function: Commanding
Data bits: 8
Stop bits: 1
Dallmeier electronic GmbH & Co.KG
Setup > Interfaces > Serial
& First select the interface to
which the TA-24 keyboard is (to
be) connected (A).
& In the Function box, select
Commanding (B).
Baud rate: 9600
Parity:
Handshake:
None
None
31