Auto Setup Function; Setting User Formats - Revox M642 HD Bedienungsanleitung

Auto setup function

The display always automatically runs the auto setup function when an analogue video format (RGB) is used for the first time.
During this period the display moves slightly back and forth to reach the optimal position and picture.
The H/V (horizontal/vertical) position and the picture size have to be set manually for several incompatible PC for-
mats. The auto setup function is highly dependent on the picture display.
A full-screen white picture is ideal.
Main input: PC (RGB)
Main input settings >
PIP Mode: Off
←

Setting user formats

You have the option of storing frequently used formats as user formats. The display unit detects these stored formats and imme-
diately displays them correctly without running the auto-adjust function.
H Freq.: 60.0 kHz
V Freq.: 75.0 Hz
Pixel Clk: 78.75 MHz
H / V Pol: + / - -
User timings >
Auto Setup
"
V Pos:
V Size:
H Size:
H Pos:
Phase
←
Under the option <RECALL> you can retrieve a stored user format and with <DELETE ALL> you can delete all sto-
red user formats.
ENGLISH
H Freq.: 60.0 kHz
V Freq.: 75.0 Hz
Pixel Clk: 78.75 MHz
H / V Pol: + / - -
User timings >
Auto Setup
"
V Pos:
V Size:
H Size:
H Pos:
Phase
←
Position: 1
Recall
"
Save
"
Delete All
"
←
. If you would like to activate auto setup manually,
select the option <INPUTS / PIP ⇒ MAIN INPUT
SETTINGS ⇒ AUTO SETUP>.
. Select the option <INPUTS / PIP> from the main
menu and choose the submenu <MAIN INPUT
SETTINGS>. Another submenu opens.
. Select the option <USER TIMINGS>.
. You can now save the user format that is set at the
moment, for example, in position 1 (8 positions are
possible) by selecting the option <SAVE>.
Getting started
15