Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instruction Manual K 106/1 & 2
___________________________________________________________________________
3.2. Explanation of the application range
Our mechanical hand guided cutting tool type K 106 is suitable for cutting earth, plastic
and rubber cables from copper and aluminium.
Attention
Do not cut steel or steel strands.
Attention
Do not cut live parts. This tool is not insulated.
Before starting to cut please make sure that all parts involved in the cutting process are not
energised.
3.3. Maintenance instruction
This mechanical cutting tool has to be cleaned and dried after use. The tool is basically
maintenance-free, only the bolt joints have to be oiled regularly and the ratchet mechanism
including the gear teeth must be cleaned thoroughly after each use.
3.4. Storage and transport of the cutting tool
In order to protect the tool against damages it must be stored in a clean and dry state in a
carrying case.
Instruction Manual K 106/1 & 2
___________________________________________________________________________
3.2. Explanation of the application range
Our mechanical hand guided cutting tool type K 106 is suitable for cutting earth, plastic
and rubber cables from copper and aluminium.
Attention
Do not cut steel or steel strands.
Attention
Do not cut live parts. This tool is not insulated.
Before starting to cut please make sure that all parts involved in the cutting process are not
energised.
3.3. Maintenance instruction
This mechanical cutting tool has to be cleaned and dried after use. The tool is basically
maintenance-free, only the bolt joints have to be oiled regularly and the ratchet mechanism
including the gear teeth must be cleaned thoroughly after each use.
3.4. Storage and transport of the cutting tool
In order to protect the tool against damages it must be stored in a clean and dry state in a
carrying case.
page 9
page 9
Werbung
