Herunterladen Inhalt Inhalt Diese Seite drucken

Transportation And Changing Of Installation Position; Changing Of Door Opening Direction; Before Calling Your After Sales Service - Nordmende RUF146WHA+ Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

PART- 5.

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope.
The rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old
installation position, all the moving objects
(ie,shelves,crisper...) should be taken out
or fixed with bands in order to prevent the
shake.

Changing of Door Opening Direction

In case you need to change door-opening direction, please consult the domestic after
sales service.
PART- 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your appliance is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected,
• The thermostat setting is on« 0 »position,
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your appliance performs poorly;
Check that;
• You have not overloaded the appliance,
• The refrigerator and freezer thermostat settings is "1" position(if so set the thermostat
dial suitable value)
• The doors are closed perfectly,
• There is no dust on the condenser,
• There is enough place at the rear and side walls.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
(For some models)
UK - 10 -

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis