Handling the device
6.
Miscellaneous
6.1 Resetting the control panel
In the rare case the device will not respond to manual
control, the control can be reset. This is done by pres-
sing and holding pushbutton „Charging profiles" while
the device is powered on. This will set following:
• Output off
• Power Supply Mode selected
• I-Limit deactivated
26
Date: 03-20-2017
© 2006, Elektro-Automatik GmbH & Co. KG
Irrtümer und Änderungen vorbehalten
EN
Instruction Manual
BC 800 R Series