Setting The Temperature - Clatronic RA 2725 Bedienungsanleitung

4....-05-RA2725-2728
In order to heat up the room more quickly the blower
can be switched on.
– only the heater blower is running
– the heater blower + first and second heating level
Please note that this paragraph only refers to the following model: RA 276 G
Set the desired temperature using the thermostat. By regularly switching the radia-
tor on and off, the thermostat ensures that the desired temperature is maintained.
1. In order to find the ideal thermostat setting, turn the thermostat control clockwi-
se to "max".
2. As soon as the desired temperature has been reached, turn the thermostat
regulator slowly anticlockwise until the radiator switches off.
3. The radiator will now automatically stay at the desired temperature.
• Always remove the power cable from the socket and allow the radiator to cool
down before cleaning it.
• Do not use any type of detergent, abrasive or polish on the housing of the
radiator as this may damage the surface.
• Wipe off the radiator with a dry cloth in order to remove dust. A damp cloth (not
wet) can be used to remove stains.
• To save space, store the mains lead in the cable compartment.
• If the radiator is not going to be used for a prolonged period it can be stored in
its original packaging.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
01.07.2002 8:39 Uhr
Heater Blower
(only for radiators with heater blowers)

Setting the Temperature

Cleaning and Cable Storage
Seite 29
29
GB