Operation And Maintenance - Rewatec Rwzt2169 Einbau- Und Montageanleitung

5. Operation and Maintenance

5.1 Operation
The filter cage should be regularly cleaned to ensure reliable performance. The emptying
frequency is based on:
The size of the roof area.
-
Local precipitation conditions, in particular the frequency and intensity of heavy rain.
-
Contamination intensity such as pollen, leaves and mobilised sediment.
-
These influencing factors can differ greatly from location to location, thus the emptying
frequency should be based on experience gathered during use
The filter cage can be removed in a few simple steps, see figures below.
5.2 Maintenance
Remove any dirt or contamination stuck to the filter, in particular contamination stuck to
the filter cage, by hosing it down or washing it with a washing-up brush and washing-up
detergent.
The required cleaning frequency is based on observations gathered during use.
REWATEC reserves the right to make technical changes to this documentation. All rights reserved. REWATEC is not liable for
The contents of the technical documentation are part of the warranty conditions.
All applicable standards and other guidelines as well as the accident prevention regulations must be observed in the planning
Regen-Ablauffilter
REWATEC GmbH March 2013
printing errors.
and installation of the product.
DORW2180 01.03.2013 7/8