PARTS
1 Spotlight
2 Joint
3 Mains plug
4 Switch
5 Motion sensor
6 Twilight sensor
BEFORE FIRST USE
1. Remove all packaging materials.
2. Verify the contents are complete and check for any transport damage.
Please contact your speciality retailer in the event of transport damage or if parts are missing.
3. Keep the original packaging. It can be reused for transport or storage.
4. Dispose of any packaging materials which is no longer needed in an environmentally friendly man-
ner and in accordance with the applicable regulations. Do not leave packaging materials lying about
carelessly, as it could become a dangerous toy for children.
MOUNTING AND OPERATION
1. Connect the plug of the light with the mains socket. Verify it is plugged in correctly. Your light is now
ready to use.
2. Only change the direction of the spotlight by the joint when the light is switched off. Allow the light
to cool completely. Carefully turn the spotlight in the desired direction.
3. Switching the light on:
Set the switch to the "AUTO" position.
• The motion sensor is activated.
• The automatic twilight sensor is activated.
• The light will automatically switch on for approx. 60 seconds if motion is detected within range of
the sensor.
• This function only works in the dark.
Set the switch to the "ON" position.
LTS1401248- LTS1401249_LED-Spot_Content_EU.indd 8
1
2
6
5
8
3
4
ON
OFF
AUTO
14.04.16 10:43