Parts Description - Peach PH310 Bedienungsanleitung

WARNING - HOT SUR-
FACES! HAZARD OF
BURNS! The heating element
can become very hot.
7
To prevent injuries, do not
touch the heating element
immediately after shrink-
7
wrapping.
Do not leave the device un-
attended when it is switched
on.
Always place the device on a
flat, solid and heat-resistant
work surface during use.
Carefully read the operating
instructions before use.
Only operate the device in-
doors. Do not use it outside
or in a damp environment.
Do not use the device in con-
junction with an extension
cable.
Keep the device and cable
away from high temperatures
and warm or damp environ-
ments.
The device does not require
a lubricating agent. Do not
use an organic solvent to
clean the device.
To prevent pressure on the
rubber seal
8
the cover of the device after
use.
do not close
To prevent damage to the
device, the vacuum tube
cannot be cleaned. Please
do not vacuum food products
which contain a lot of water.
To prevent injuries, do not
open the cover or touch the
vacuum chamber
the device is connected to
the power supply.

Parts description

Stop button
1
Vacuum seal button
2
Heat seal button
3
Cover release (left and right)
4
LED-Display Vacuuming
5
LED-Display Heat Sealing
6
Heating element
7
Seal
8
Vacuum pump vent
9
Vacuum chamber
10
Scope of delivery
1 Vacuum Sealer
1 Spare seal
1 Starterpack
1 Operating instructions
Before first use
Remove all packaging material before first
use.
Remove the transport securing device
from the vacuum chamber
read the notes in the quick start guide and
keep this in a safe place.
when
10
. Carefully
10
11