Psiber Data Systems CableMaster CM650 Kurzanleitung Seite 5

Link Light
•
Power on the CableMaster 600/650.
•
Connect the CableMaster 600/650 to an active Network cable or port.
•
Press the Network/Poe soft key
•
The Link Light will automatically begin upon entering the Link Blink menu.
•
The Link LED above the LCD screen will flash at the same cadence as
the port light.
•
Use the up and down arrows to adjust the transmit frequency to suit the switch
characteristics.
English
then press the Link Light soft key.