Getting Started; Driver Installation On Both Computers; Driver Installation: Windows 8/7 - j5 create WORMHOLE SWITCH JUC700 Bedienungsanleitung

GETTING STARTED

Please read BEFORE Installation
 Install driver completely on both computers before inserting the USB 3.0 WORMHOLE
SWITCH JUC700 USB Cable into your computers.
 You can connect any side/color of the USB 3.0 WORMHOLE SWITCH JUC700 USB Cable
to either of your computers.
 Run the setup program as An administrator to avoid errors in installation
 Uninstall the previous driver first before updating the latest driver
 The display screen will flash during installation
I. Driver Installation on both computers:
Please install the driver on both of the computers that will be connected to the JUC700. In the
future, please also remember to update the driver on both sides.
※Please make sure the USB cable of USB 3.0 WORMHOLE SWITCH JUC700 is unplugged from
your PC or Notebook before executing the installation program.

Driver installation: Windows 8/7

Please complete the following steps to start the application. Insert the Driver CD into your
computer's CD-ROM drive. The setup program should be launched automatically. If Autorun does
not begin, go to Computer, click on your CD drive and manually run the setup CD by
double-clicking on Setup.exe
1. The installation page will be launched. To start click on Install the Latest Driver (Please make
sure your computer is connected to the internet or press Install Driver to start the installation).
WORMHOLE SWITCH JUC700
6
USER MANUAL