Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
LIFT – HIGHTECH IN MOTION
Dear customer,
thank you for buying our LIFT power tower for desks, trainingcentres, conference tables or kitchen.
We would like to present you herewith the simple assembly steps.
Your Bachmann GmbH & CO. Kg
Dimensions of LIFT and first mounting step
LIFT dimensions:
Built-in dimension: ............................Ø 140mm
Built-in depth: ......................... approx. 195mm
Table thickness: ........................ approx. 10mm
Second mounting step
Please pack the LIFT tower out of the packaging
and beware of scratches on the surface of the
tower.
3 mounting step
Screw on the ring to the body of the tower till to
the underside of the table.
Connection
In general the LIFT tower is delivered with fixed
connected cable.
The cables have at the output from the tower a
strain relief.
Function LIFT
Operating instructions LIFT DE-EN_Rev. 01
Technical changes, errors and other mistakes might be possible in this documents.
For the mounting of the LIFT power tower it is
necessary to make a round hole in the table at the
position you need. The round hole should have a
diameter of 140mm.
For the drill hole we offer additional a hole saw.
(Ref. 904.900)
Insert the body of the tower into the hole.
The cables have to be insert carefully before the
body in that hole.
Please screw the ring carefully and take care that
the ring is not sloping to the body. Screw the ring
not to hard and don´t damage thread.
To use the tower press the inner lid down. The
tower will get out automatically and the outlets are
available. When the tower is not used anymore
please put the plugs ouf of the outlets and press the
inner lid till down. The tower is blocked in the body
and the inner lid is plan to the outher ring of the
tower body.
In general the cables have allready connectors at
the end of the cable and can be connected easily.
Notice:
The electrical installation should be done by a
qualified electrician.
Page 2 of 2
Ø = 140 mm
Bachmann GmbH & Co. KG D-70565 Stuttgart / Germany
www.bachmann.com
Mat.-Nr. 09.415
Werbung
