Description Of The Components - Klauke AHP 590LP33 Bedienungsanleitung

Instruction Manual Battery-hydraulic Pump
AHP 590LP33
3. Description of the electro-hydraulic pumping unit

3.1 Description of the components

The electro-hydraulic pumping unit consists of the following components:
Table 3 (see pic.1)
Pos. Description
1 Battery (RAL2/BL1830)
2 battery lock
3 Emergency stop button
4 Compartment
5 Male plug (pic. similar)
6 Socket
7 Oil plug
8 Program selection switch
9 OLED Display
10 LED (red)
11 Forward and return keys
HE.14335_A © 05/2012
Function
rechargeable 3Ah Li-Ion battery (RAL2/BL1830)
Optional: mains adapter NG2230
Slide to unlock the battery
To reset the crimping, cutting and punching tools into the starting
position in case of an error.
~ e.g. for remote control and/or carrying belt
Male plug to connect to a female plug on the hose (pic. 16)
for remote control, safety foot switch, two hand control and other
controls
Oil plug with inspection glass for the hydraulic oil
Turning knob for the selection of special programs for crimping,
cutting, punching as well as a position to read out data.
High tech organic display to indicate tool and crimping/cutting data
Indicator for Battery charge, Service Intervals and faults
To start/stop the working cycle
3
GB