Ignition M3 MEZZO Bedienungsanleitung

CONTROL MODE menu item with the regarding manufacturers'
transmitters.
Control Mode: You decide how to operate your
OPTIONS:
+/- key > link
device. If you would like to control your device
VISIBILITY:
via remote control, please select remote cont-
rol mode. By selecting this option also on other
M3 Mezzo, devices will automatically commu- DMX MODE
nicate with each other, if same group setting is
If you operate M3 Mezzo via DMX signal, decide
chosen for all M3 Mezzo. An example: remote
here in which mode you would like to work.
control mode is selected for all M3 Mezzo and
Please feel free to contact us by email in case
they are all assigned to "group 1". You can ch-
of query, we will be pleased to help you.
ange the colour, program or brightness at one
M3 Mezzo or you can use the "Chain Mode" – in
OPTIONS:
3C DIM,PROGRAM | 4C DIM,
this way M3 Mezzo will synchronize with one
3*COLOR | 12C 4*RGBW | 24C 4*RGBW16
another. In case remote control's signal does
VISIBILITY:
not reach all M3 Mezzo, the last M3 Mezzo in
WDMX-Modus
signal range will transmit it to the M3 Mezzo out
of scope. "They talk to each other", as we call it.
DMX ADRESS
OPTIONS: Standalone | Remote Control |
DMX/WDT-1 (Receiver) | WDMX
Assign a house number to each M3 Mezzo so
Note: This option is only available if WDMX
that the postman knows where to deliver the
module is connected. (wireless solution /
data packet.
lumen radio)
OPTIONS: DMX starting adress (1....521-x)
VISIBILITY:
Always
VISIBILITY:
SOUND TO LIGHT
WDMX-Modus
Sound to light: An integrated microphone is
mainly set for bass frequencies and tries regu-
CHAIN SIZE
larly to adjust the volume automatically in order
Suppose you have 6 M3 Mezzo and you would
to, at best, obtain constantly sensible volume
like to create a little show without program-
levels. Select this option directly on your device
ming effort per light board – then you have
or via remote control. The sound-to-light mode
come to the right place! Please insert number
is no ordinary sound-to-light mode; rather,
of units here. Further explanation in menu
you can activate this feature and hence control
item "pos. in Chain".
the pre-programmed programs. This happens
automatically when activating this mode.
OPTIONS:
1 - 50
OPTIONS:
Enabled | Disabled
VISIBILITY:
VISIBILITY:
Only in Standalone and Remote Control-Mode and in DMX | WDT-1 (Recei-
Control mode ver) | WDMX-Modus, if „3C"-DMX-Mode is
activated
W-DMX STATUS
POSITION IN CHAIN
W-DMX status: In case you have assembled
a „Wireless Solution" or „Lumen Radio" DMX
Continuation of "Chain Size": Now assign num-
card, connect your M3 Mezzo under this
bers to each of your 6 M3 Mezzo. Start with
number 1, and finish with 6, from left to right,
for instance. By calling up programs with
colour gradients, you can observe how effects
and flow will, from now on,"run" over your
Only in WDMX mode
various devices. Please make sure that all M3
Mezzo are in the same group.
OPTIONS: 1 - 50
VISIBILITY:
Only in Standalone | Remote
Control-Mode and in DMX | WDT-1 (Receiver) |
WDMX-Modus, if „3C"-DMX-Mode is activated
PROGRAM
The first programs are "solid colours", follo-
Only in DMX | WDT-1 (Receiver) |
wed by colour gradients and effects. Choose
whatever pleases you!
OPTIONS:
1 - 40
VISIBILITY: Only in Standalone and Remote
Control-Mode
SPEED
Only in DMX | WDT-1 (Receiver) | Having chosen a program with colour gradient,
you can adapt speed here.
OPTIONS:
-2, -1, 0, +1, +2
VISIBILITY: Only in Standalone and Remote
Control-Mode
BRIGHTNESS
Decide steplessly on brightness.
OPTIONS:
0 - 100
VISIBILITY: Only in Standalone and Remote
Control-Mode
Only in Standalone | Remote
WDT-1 TRANSMITTER
A wireless DMX transceiver is integrated in every
M3 Mezzo. Hereby, you can, for instance, connect
a M3 Mezzo with your light board via DMX cable,
and then activate this menu item. The M3 Mezzo
now transfers a wireless DMX signal to all other
M3 Mezzo, as well as to other ignition products,
automatically. In other words, you do not need
any separate wireless DMX transmitter. Never-
theless, ignition also offers separate wireless
DMX transmitter with higher transmitter power.
OPTIONS: Enabled | Disabled
BEDIENUNG S A NLEIT UNG IN S T RUC T ION M A NUA L
VISIBILITY: Only in DMX | W-DMX mode
GROUP
Suppose you have up to 4 different rooms in
close vicinity to each other, and you would like
to operate all rooms differently. In this case,
will assign your devices to different groups. You
can thusly control up to 4 "areas" individually
by remote control. This also applies for the "M3
Mezzo talking to each other".
OPTIONS: 1 - 4
VISIBILITY: Only in Remote Control | WDT-1
(Receiver) mode and if „WDT-1-Transmitter" is
activated
INFO
The battery status is indicated here. This is the
most important point. Device running time,
serial number as well as several other informa-
tion are displayed here too.
OPTIONS: Battery status, Device running
time, serial number and more
VISIBILITY: Always
Menu Up
B&K Braun GmbH
Industriestraße 2
D-76307 Karlsbad (Germany)
Tel. +49(0)7248-912 100
Fax. +49(0)7248-912 119
info@bkbraun.com
www.bkbraun.com
WEEE-Reg.-Nr. DE85553070
Lens Can be moved up / down
and used upside down
Menu Down
Power Switch On/Off
LCD Display
Value Up Value Up
Value Down Value Down