Specifications - SYNQ AUDIO RESEARCH SMP 8.2 Bedienungsanleitung

ENGLISH

SPECIFICATIONS

Power Supply AC 230 V, 50Hz
Power consumption 25W
Max output level (0.5% thd @ 1kHz) +26dB (MAIN L/R)
+20dB (INSERT)
More than 100mW (HEADPHONES) @33Ohm
T.H.D. <0.1% @ +14dB 20Hz~20kHz (MIX L/R, AUX SEND, EFX SEND,
CTRL ROOM)
Frequency response 20Hz~20kHz, +1/-2dB (MIX L/R, AUX SEND, EFX SEND, CTRL
ROOM)
Hum and Noise (average Rs=150Ohm) -127dB equivalent input noise
-95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL
ROOM)
-88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader
at nominal level and all channel volumes at minimum.
Maximum Voltage Gain 66dB MIC IN TO MAIN L/R
60dB MIC IN TO AUX
66dB MIC IN TO EFX
76dB MIC IN TO CONTROL ROOM L/R
58.2dB IN TO REC L/R
46dB LINE IN TO MAIN L/R
46dB LINE IN TO AUX
46dB LINE IN TO EFX
56dB LINE IN TO CONTROL ROOM L/R
36dB STEREO IN TO MAIN L/R
6dB AUX RETURN IN TO MAIN L/R
16dB TAPE IN TO MAIN L/R
Crosstalk (@ 1kHz) -70dB between input channels
-70dB between input/oputput channels
Gain Control (mono input channel) 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB)
Gain Control 40dB Variable (-20dB ~ +20dB)
(combined mono/stereo input channel)
Input channel Equalization HIGH: 12kHz shelving
MID: 2.5kHz peaking
LOW: 80Hz shelving
*Turnover/roll off frequencies: located 3dB below max. boost/cut
LED Meters 2x 10 segment LED for MAIN L/R
Internal Digital Effect 100 selectable presets
FOOT Switch control (ON/OFF)
Channel indicators Peak: an indicator for each channel turns on when the pré-channel
fader signal is 5dB below clipping
Phantom Power (balanced input) +48V DC
Weight 2,8 kg
Dimensions 249(W) x 75(H) x 295(D) mm
®
SYNQ 15/98
OPERATION MANUAL
SMP8.2
ENGLISH
Specifications
-INPUT
-OUTPUT
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
®
SYNQ 16/98
OPERATION MANUAL
SMP8.2