Renkforce 1610097 Gebrauchsanweisung Seite 3

Operating Instructions
Stand for Amazon Echo Dot
Item No. 1610097
Intended Use
This stand will allow you to place your Echo Dot (2
to a wall. A locking top plate offers easy removal for cleaning, and the translucent plastic
material accentuates the glow from the Echo Dot ring light. The open design provides clear
access to ports and controls without blocking the microphone and sound from the speaker.
For safety purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Stand
• 4x plastic wall dowels
• 4x screws
• 4x rubber feet
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
generation) on a desk or securely mounted
nd
Operating Elements
1 Top plate
2 Top plate locking pin
3 Wall / ceiling mounting points
4 Base plate
Getting Started
One extra screw, dowel and rubber foot are included as spares, keep these in a
safe location.
a) Attaching Rubber Feet
Rubber feet are included to prevent the stand from slipping when placed on a desk. Remove
the adhesive backing and attach to the base plate as shown.
If you plan on mounting the stand onto a wall or ceiling, you may skip this step. Refer
to section "c) Wall or Ceiling Mounting" for more information. Keep the rubber feet in
a safe location for future use.
b) Lock / Release the Top Plate
1
2
3
4