Product Specification; Operating Controls; Before Use; Intended Use - Bosch AXT 2000 HP Bedienungsanleitung

F016 L70 438 - book.book Seite 2 Dienstag, 28. Februar 2006 3:26 15

Product Specification

Quiet shredder
Part number
Power consumption S 6 (4/6 min)
Power consumption S 1
No-load speed
Capacity max.
Branch diameter max.
Collecting bag
Weight. approx.
Protection class
1)
The S 6 operating mode (40 %) indicates a load profile of 4 min load and 6 min idle time. For practical application, contin-
uous operation is permitted.
2)
Depending on the hardness of the wood.

Operating Controls

1 Feed intake
2 On/Off switch
3 Rotational direction switch
4 Mains plug**
5 Pusher/clearing hook
6 Undercarriage
7 Collecting bag/cover *
8 Discharge chute
9 Hooks for collecting bag
10 Serial Number
*Accessories
**Country specific
*Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The product is intended for cutting of fibrous and
woody garden waste for composting.
Assembly
Remove the machine from the package
(see figure ).
A
Mount the wheels and the undercarriage
(see figure ).
B
10 • F016 L70 438 • 06.02
AXT 1 600 HP
0 600 851 2..
1
[W] –
[W] 1 600
[rpm] 260
2)
[kg/h] 100
2)
[mm] 33
not included, Accessories
[kg] 21
/ I

Before Use

Always use the correct supply voltage! The volt-
age of the power source must agree with the value
given on the nameplate of the machine. Machines
designated for 230 V can also be operated with
220 V.
The circuit must be protected by fuse with at least
10 A.
When operating the machine with a generator, a unit
with a power rating of 3.5 kVA/2800 W is necessary.
(e. g. Bosch generator units G-3600-series).
An extension cable with a cross section that is too
small causes a distinct reduction in the performance
capabilities of the machine. For cables to 25 m in
length, a cross section of at least 3 x 1,5 mm
quired, for cables more than 25 m in length, the
cross section must be at least 2,5 mm
Always completely unwind cable reels.
Remove any soil from root balls. Foreign bodies like
stones, glass, metals, fabrics, or plastics must not
enter the feed intake since this could damage the
spiral cutting knives.
English - 2
AXT 2 000 HP
0 600 851 4..
2 000
1 800
260
2)
115
2)
38
22
/ I
Always place the machine on firm level
ground. During operation, do not tilt or move.
2
is re-
2
.