Noise/Vibration Information; Declaration Of Conformity - Bosch AGS 7,2 LI Originalbetriebsanleitung

OBJ_BUCH-1077-004.book Page 23 Wednesday, July 6, 2011 9:54 AM
Charging current
Allowable charging
temperature range
Weight according to
EPTA-Procedure
01/2003
Please observe the article number on the type plate of your garden product. The trade names of the individual garden
products may vary.
**approx. run time
***only with "ASB 10,8 LI Set"

Noise/Vibration Information

Grass Shear
Measured sound values determined according
to EN 60745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB(A).
Vibration total values a (triax vector sum) and
h
uncertainty K determined according to
EN 60335:
2 2
a =2.5 m/s , K =1.5 m/s .
h
Shrub Shear
Measured sound values determined according
to 2000/14/EC.
Typically the A-weighted noise levels of the
product are: Sound pressure level 66 dB(A);
sound power level 76 dB(A). Uncertainty
K =1 dB.
Vibration total values a (triax vector sum) and
h
uncertainty K determined according to
EN 60745:
2 2
a =2.5 m/s , K=1.5 m/s .
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
Bosch Power Tools
Grass Shear
(*with pole cart)
AGS 7,2 LI AGS 10,8 LI
mA 500
°C 0– 45
kg 0.088 (EU) 0.088 (EU)
kg 0.093 (UK) 0.093 (UK)
kg 0.085 (AU) 0.085 (AU)
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.

Declaration of Conformity

Grass Shear
We declare under our sole responsibility that
the product described under "Technical data" is
in conformity with the following standards or
standardization documents: EN 60335 (battery
powered product) and EN 60335 (battery charg-
er) according to the provisions of the directives
2006/95/EC, 2004/108/EC, 2006/42/EC.
Shrub Shear
ASB 10,8 LI ASB 10,8 LI Set
ASB 10,8 LI 2-Set
500 500
0– 45 0– 45
0.088 (EU)
0.093 (UK)
0.085 (AU)
F 016 L70 839 | (6.7.11)
English | 23
Shrub/Grass
Shear Set
500
0– 45
0.088 (EU)
0.093 (UK)
0.085 (AU)